<xsl:text> Windows Boot Manager </xsl:text>

<_locDefinition> <_locDefault _loc="locData"/> <_locTag _locAttrData="pad-left,pad-right">p <_locTag _locAttrData="height,width">textarea <_locTag _locAttrData="minsize">select <_locTag _locAttrData="size">progressbar <_locTag _locAttrData="size,maxlen">input <_locTag _locAttrData="value">osxml:update

Windows BitLocker Drive Encryption Information

The system boot information has changed since BitLocker was enabled.

You must supply a BitLocker recovery password to start this system.

Confirm that the changes to the system boot information are authorized.

If the changes to the system boot information are trusted, then disable and re-enable BitLocker. This will reset BitLocker to use the new boot information.

Otherwise restore the system boot information.

Windows BitLocker Drive Encryption Information

This boot application has changed since BitLocker was enabled.

You must supply a BitLocker recovery password to start this system.

Confirm that the changes to this boot application are trusted.

If the changes are trusted then disable and re-enable BitLocker. This will reset BitLocker to use the new boot application information.

Otherwise re-install the previous version of this boot application.

Boot Application:
Changed Option:

Windows BitLocker Drive Encryption Information

The Boot Configuration Data (BCD) settings for the following boot application have changed since BitLocker was enabled.

Boot Application:
Changed Setting:

You must supply a BitLocker recovery password to start this system.

Confirm that the changes to the BCD settings are trusted.

If the changes are trusted then disable and re-enable BitLocker. This will reset BitLocker to use the new BCD settings.

Otherwise restore the original BCD settings.

Windows BitLocker Drive Encryption Information

The Storage Root Key (SRK) of the Trusted Platform Module (TPM) is incompatible with BitLocker.

You must supply a BitLocker recovery password to start this system until the authorization information for the SRK of the TPM is reset to zero.

Windows BitLocker Drive Encryption Information

The boot debugger is enabled.

You must supply a BitLocker recovery password to start this system until the boot debugger is disabled.

Disable the boot debugger by running this command in a command prompt window:

bcdedit -bootdebug {bootmgr} off

Windows BitLocker Drive Encryption Information

The Trusted Platform Module (TPM) has locked out access to BitLocker keys until the system is rebooted.

You must supply a BitLocker recovery password to start this system.

You can also reboot the system to restore access to this selection without a recovery password.

Windows BitLocker Drive Encryption Information

An incorrect PIN was supplied too many times.

The Trusted Platform Module (TPM) has temporarily locked out access to prevent unauthorized access to Windows.

Wait a few moments. Then re-enter your PIN correctly.

If you do not remember the PIN, you must supply a BitLocker recovery password to start this system.
Press ENTER to re-enter the PIN. Press ESC for recovery.

Windows BitLocker Drive Encryption Information

The Trusted Platform Module (TPM) in this system is disabled.

You must supply a BitLocker recovery password to start this system until the TPM is re-enabled.

Enable the TPM from the system BIOS setup or from the TPM management console.

Windows BitLocker Drive Encryption Information

You pressed the F8 or F10 key to enable alternative operating system boot options.

You must supply a BitLocker recovery password to start this system with alternative boot options.

Windows BitLocker Drive Encryption Information

Your computer did not start or shutdown normally, and you selected a boot option other than Start Windows Normally.

You must supply a BitLocker recovery password to start this system with alternative boot options.

You can also reboot the system and select Start Windows Normally to restore access without a recovery password.

Windows BitLocker Drive Encryption Information

The BitLocker encryption key obtained from the Trusted Platform Module (TPM) was discarded by the operating system loader.

The Trusted Platform Module (TPM) has locked out access to BitLocker keys until the system is rebooted.

You must supply a BitLocker recovery password to start this system.

Windows BitLocker Drive Encryption Information

Drive Label:
Key Filename:

This key file exists on the USB flash drive, but is corrupt or invalid. Replace this file with a copy of the original key file.

Windows BitLocker Drive Encryption key needed.

Insert key storage media.

Press ESC to reboot after the media is in place.

Drive Label:
Key Filename:

Windows BitLocker Drive Encryption key loaded.

Remove key storage media.

Windows BitLocker Drive Encryption Password Entry

Enter the recovery password for this drive.

Drive Label:

Password ID:

Use the function keys F1 - F9 for the digits 1 - 9. Use the F10 key for 0.
Use the TAB, SHIFT-TAB, HOME, END and ARROW keys to move the cursor.

The UP and DOWN ARROW keys may be used to modify already entered digits.

Windows BitLocker Drive Encryption Password Entry

That recovery password is incorrect.

Press ENTER to try another password.

Windows BitLocker Drive Encryption PIN Entry

Enter the PIN for this drive.

Drive Label:

Use the function keys F1 - F9 for the digits 1 - 9. Use the F10 key for 0.
Use the HOME, and BACKSPACE keys to clear incorrect digits.

Press ENTER after the PIN is typed. Press ESC for recovery.

Windows BitLocker Drive Encryption PIN Entry

That PIN is incorrect.

If you entered the PIN with the number keys, use the function keys F1 - F10 instead.

Press ENTER to try another PIN. Press ESC for recovery.

<xsl:text> Windows Boot Manager </xsl:text>

<xsl:text> Windows Boot Manager (Server IP: <xsl:value-of select="."/>) </xsl:text>

Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your Windows installation disc and restart your computer.

2. Choose your language settings, and then click "Next."

3. Click "Repair your computer."

If you do not have this disc, contact your system administrator or computer manufacturer for assistance.

A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.

If you have a Windows installation disc, insert the disc and restart your computer. Click "Repair your computer," and then choose a recovery tool.

Otherwise, to start Windows so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, and select Last Known Good. If you understand why the digital signature cannot be verified and want to start Windows without this file, temporarily disable driver signature enforcement.

Windows has encountered a problem communicating with a device connected to your computer.

This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer.

If you continue to receive this error message, contact the hardware manufacturer.

File:
Source:
Status:
Line:
Info: <xsl:value-of select="@info"/>

<xsl:text> Windows Boot Manager </xsl:text>
Your computer can't come out of hibernation.

Status:
Source:
Line:

Info: <xsl:value-of select="@info"/>

File:

Any information that was not saved before the computer went into hibernation
will be lost.

<xsl:text> Windows Boot Manager </xsl:text>

<xsl:text> Windows Boot Manager (Server IP: <xsl:value-of select="."/>) </xsl:text>

Choose an operating system to start, or press TAB to select a tool:
(Use the arrow keys to highlight your choice, then press ENTER.)

───────────────────────────────────────────────────────────

</p> </font> <br/> <xsl:for-each select="@timeout"> <textarea name="timerstr" width="68">Seconds until the highlighted choice will be started automatically: </font> </xsl:for-each> <br/> <br/> <br/> <br/> <font foreground-color="RGBI"> Tools: </font> <br/> <font foreground-color="RXXI"> ‾‾‾‾‾‾ </font> <br/> <p pad-left="4" pad-right="16"> <select name="osboot-tool-selection" minsize="3" tip-target="advops-prompt" right-justify="true" active-color="RGBIRXBX" normal-color="RGBX"> <xsl:for-each select="osboot-tool"> <xsl:element name="option"> <xsl:for-each select="@default"> <xsl:attribute name="selected">true</xsl:attribute> </xsl:for-each> <xsl:attribute name="value"><xsl:value-of select="@value"/></xsl:attribute> <xsl:attribute name="tip"><xsl:value-of select="@tip"/></xsl:attribute> <xsl:value-of select="@name"/> </xsl:element> </xsl:for-each> </select> </p> </form> </body> </osxml:text-mode-ui> </xsl:template> <xsl:template match="osboot-list"> <osxml:text-mode-ui> <head> <xsl:for-each select="@nowds"> <title><xsl:text> Windows Boot Manager </xsl:text></title> </xsl:for-each> <xsl:for-each select="@wds"> <title><xsl:text> Windows Boot Manager (Server IP: <xsl:value-of select="."/>) </xsl:text></title> </xsl:for-each> <footer><xsl:text> ENTER=Choose ESC=Exit </xsl:text></footer> <meta key="ENTER" action="submit"/> <meta key="ESC" action="exit"/> <meta key="F8" action="advops"/> <meta key="F8" action="submit"/> <meta key="F10" action="bootops"/> <meta key="F10" action="submit"/> <meta key="OEMKEY" action="oem"/> <xsl:for-each select="@timeout"> <meta key="ANY" action="anykey"/> <meta event="TIMEOUT" action="submit"/> <timer initial="{.}" control="timerval"/> </xsl:for-each> </head> <body background-color="XXXX" foreground-color="RGBX"> <br/> <font foreground-color="RGBI"> Choose an operating system to start: </font> <br/> (Use the arrow keys to highlight your choice, then press ENTER.) <br/> <br/> <p pad-left="0" pad-right="8"> <form> <select name="osboot-selection" minsize="10" tip-target="advops-prompt" right-justify="true"> <xsl:for-each select="osboot-entry"> <xsl:element name="option"> <xsl:for-each select="@default"> <xsl:attribute name="selected">true</xsl:attribute> </xsl:for-each> <xsl:attribute name="value"><xsl:value-of select="@value"/></xsl:attribute> <xsl:attribute name="tip"><xsl:value-of select="@tip"/></xsl:attribute> <xsl:attribute name="carat"><xsl:value-of select="@carat"/></xsl:attribute> <xsl:value-of select="@name"/> <xsl:for-each select="@ems"> [EMS Enabled]</xsl:for-each> <xsl:for-each select="@debugger"> [debugger enabled]</xsl:for-each> </xsl:element> </xsl:for-each> </select> </form> <br/> </p> <font foreground-color="RGBI"> <textarea name="advops-prompt" width="76" height="1"/> </font> <br/> <xsl:for-each select="@timeout"> <textarea name="timerstr" width="68">Seconds until the highlighted choice will be started automatically: </xsl:for-each> <br/> </body> </osxml:text-mode-ui> </xsl:template> <xsl:template match="timeout-cancel"> <osxml:update disable-timer="true"/> <osxml:update control="timerval" value=""/> <osxml:update control="timerstr" value=""/> </xsl:template> <xsl:template match="progress-bar"> <osxml:text-mode-ui> <body background-color="XXXX" foreground-color="RGBX"> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <br/> <p pad-left="25">Windows is loading files...</p> <br/> <meter name="progressbar" size="76"/> <p pad-left="2"> <textarea name="progressinfo" width="76"/> </p> </body> </osxml:text-mode-ui> </xsl:template> <xsl:template match="progress-update"> <osxml:update control="progressbar" value="{@value}"/> </xsl:template> <xsl:template match="progress-info"> <osxml:update control="progressinfo" value="{@value}"/> </xsl:template> <xsl:template match="bootmgr"> <osxml:text-mode-ui> <head> <meta key="ANY" action="anykey"/> <meta key="F8" action="advops"/> <meta key="F10" action="bootops"/> <meta key="OEMKEY" action="oem"/> </head> </osxml:text-mode-ui> </xsl:template> <xsl:template match="bootmgr-end-menu"> <osxml:text-mode-ui> <body background-color="XXXX" foreground-color="RGBX"> <br/> </body> </osxml:text-mode-ui> </xsl:template> <xsl:template match="*|@*|text()"/> </xsl:stylesheet>